Product Category
The AOK-HPOE30 draws a 30W budget from an IEEE 802.3at Ethernet cable and delivers up to 20W of USB-C power delivery plus Gigabit Ethernet and three USB-A 5Gbps ports. One cable runs a tablet station, kiosk or hot-desk together with its keyboard, scanner or document camera.
30W 802.3at PoE budget Up to 20W of USB-C PD to the tablet or mini PC (5V/3A, 9V/3A, 12V/1.67A, 15V/1.3A), with budget left for the connected peripherals. | 3x USB-A 5Gbps downstream ports Dock a keyboard, stylus receiver, document camera, scanner or card reader on the same single-cable feed. | ★ USB-C to C cable included USB-C female port with a USB-C to C cable in the box — use it as supplied or substitute a different cable length. | ◆ Built to stay installed Gigabit Ethernet, aluminum housing for heat dissipation, plus over-current, over-voltage, short-circuit and surge protection. |
A tablet or mini PC needs modest charging power, and the 20W USB-C PD output of HPOE30 covers it — while the three USB-A ports handle the peripherals around it. That is the typical tablet station in a classroom, library or shared desk: a screen, a keyboard, maybe a stylus receiver or document camera.
Every device on the station runs from one Ethernet drop. Shared tablet carts and learning stations need one cable per slot instead of a charger and a network cable per device, and adding a seat is a matter of a switch port, not a wiring project.

Confirm the PoE switch's per-port and total power budget before planning a multi-device rollout.
Tablet cartsLearning stationsHot-desksSelf-service kiosksCheckout countersDocument camera stations
Need a custom cable length, connector type or power tier?
Request a quote →AOK Electronics Co., Ltd.